Remington QUICKGROOM BHT6450AU, Use & Care Manual

Page: 6 / 12

6
INSTRUCTIONS FOR USE
• Select the desired trim length prior to trimming by attaching one of the fixed
combs.
• If trimming for the first time, always start with the longest length comb
(12mm).
• Avoid using lotions before using your trimmer.
1. Switch your trimmer on by pressing the on/off button.
2. Stretch the skin with your free hand so the hairs stand upright.
3. Use short linear strokes.
CHANGING ATTACHMENTS
• Always ensure the trimmer is switched off before attaching or removing a
comb.
• To attach a comb, centre it over the main blade and push down until it clicks.
• To remove the comb, unclick the sides of the comb where it connects to the
trimmer and lift the comb away from the trimmer.
BODY TRIMMING
1 Place your trimmer at a slight angle, following the angle of the comb teeth.
2. Slowly slide the trimmer through the hair, in the direction of hair growth.
• Longer/thicker body hair may take more passes from different angles.
• If hair builds up in the trimmer comb during the trimming process, switch the
unit off and remove the fixed trimmer comb. Brush the trimmer/rinse comb.
• For closer more precise shaping, remove the comb.
T
RIMMING WITHOUT A COMB
Your trimmer has been designed to trim any length of body hair to a length of
0.2 mm when it is used without a comb for a ‘shaved’ look.
EDGING AND SHAPING OR CLOSE TRIM
1. Remove the trimmer comb attachment.
2. Hold the trimmer at a slight angle to your skin and press down gently.
USING THE DETACHABLE HANDLE
• The detachable handle allows for easy grooming of hard to reach areas such
as the back.
• The first time you use the handle, you need to attach the handle bracket with
the arm.
NOTE: Once you have attached the handle bracket to the arm it cannot be
removed.
• To use the handle, simply align the trimmer with the handle bracket so the
power button is facing in toward the handle bracket and the blade facing
outward.