4
F
INSTRUCTIONS FOR USE
1 Before use, ensure the hair is clean, dry and tangle-free.
,
The PROtect styler can also be used without operating the HydraCare
function, follow steps 6-12 and 16-23.
2 Before operating the HydraCare function, the reservoir must be illed with
water.
,
Do NOT operate the HydraCare function if the reservoir is empty.
3 To ill the reservoir with water, remove the capsule from the base of the
product (ig. 1).
,
A full reservoir should last approximately 5 styling session depending on
hair length, hair type and styling habits.
4 Gently, pull the plug using the tab to reveal the opening of the reservoir and
ill with water (ig. 2).
,
To prolong the life of the product we recommend using iltered or distilled
water ONLY.
5 Dry of excess water and replace the plug securely, place the capsule back
into the base of the product until you hear a ‘click’.
6 Section the hair prior to styling. Style the lower layers irst.
7 Plug the product into the mains power supply. Press and hold the on button
to switch on.
8 The recommended optimum temperature of 170ºC is automatically selected.
9 To adjust the temperature use the +/- temperature controls on the side of the
product. ‘+’ increases the temperature, ‘-‘ decreases the temperature.
10 Temperature Boost Function: To activate, press and hold ‘+’ for 2 seconds,
this automatically selects the highest temperature.
ENGLISH
Fig. 4
Fig. 2
Fig. 1
Fig. 3
Summary of Contents for PROtect CI8725
Page 1: ...CI8275 PROtect Tong ...