16
114918
Maintenance
IMPORTANT:
Clean tool after each days use. Disassemble and clean the barrel assembly with the
wire brush provided with tool. Notice: DO NOT attempt to clean power load strip
channel with wire brush. Apply good quality penetrating lubricant spray (such as WD-
40) sparingly and wipe dry.
PISTON OVERDRIVE
If the tool does not open after firing and the piston is 1/2 inch or more out of the muzzle:
1. Strike muzzle end of tool against hard surface to force piston back into muzzle.
2. Advance power load strip and reset piston (See step 6 of
Operation).
Operation
OVERDRIVE
Parts List
2
3
1
5
8
4
7
6
32
33
11
9
9
30
29
10
34
31
21
22
14
15
12
13
16
26
23
25
24
19
20
17
18
27
28
