INSERTING THE BATTERY
Your Remington® Precision Personal Groomer runs on one “AA” ALKALINE
battery.
1. To open the battery compartment, turn the base of the unit approximately 1cm
counter-clockwise (to the left) and pull it off.
2. Insert the battery into the unit, positive end first.
3. Replace the base and turn it 1cm clockwise (to the right) to lock it into place.
Battery cautions
• Use of non-alkaline batteries will impair the unit’s operating performance.
• Battery should not be left in the unit if the unit is not in use for long periods.
• To prevent battery corrosion, the unit should be stored in a dry environment.
• Dead batteries should be removed immediately and disposed of properly.
• Do not use rechargeable batteries with this appliance. The lower voltage in
rechargeable batteries impairs the performance of the cutting unit.
HOW TO USE
Before using your Groomer:
• Beard, moustache or sideburn hairs should be dry. Avoid using lotions before
using your groomer.
• Be certain that the hair length attachment is at the desired setting. When first
using, you may want to begin on the highest setting (longest hair) to prevent
trimming off too much hair initially.
• Comb hairs outward so they are at their maximum height and facing in the
same direction.
CHANGING THE ATTACHMENT HEADS
This model comes with interchangeable attachments. You may want to use the
detail groomer & comb for your beard, moustache, neckline & sideburns. The
vertical attachment can be used for nose hair trimming, and eyebrow hair
trimming using the combs.
To change heads:
1. Turn the groomer off.
2. Detach cutting head by turning it clockwise to the unlocked position and pulling
it off.
3. Once the previous head is removed, attach the other head by placing it on top
of the unit and turning it counter-clockwise to the locked position.
4
5
