5
BASIC HAIR CARE INSTRUCTIONS
The Mineral Glow Straightener is designed with advanced ceramic
coated plates, infused with 4 naturally sourced minerals, for beautiful,
smooth results.
•
For optimal results, shampoo and condition your hair prior to styling,
then dry your hair thoroughly and make sure that it is tangle free.
•
For extra protection use a heat protection spray.
•
Hairsprays contain flammable material - do not use while using this
product.
Note:
The Mineral Glow Straightener is not recommended for use on
synthetic wigs or hair extensions.
CERAMIC COATED FLOATING PLATES, INFUSED WITH 4 NATURAL
MINERALS
The ceramic coating is infused with opal, moonstone, tourmaline & quartz,
for a smooth glide.
HIGH HEAT PERFORMANCE UP TO 230°C
Ready to use in 15 seconds with the fast heat up system.
HOW TO USE YOUR MINERAL GLOW STRAIGHTENER
•
Plug the product into the mains power supply. When the styler is
plugged in but not turned on, ‘---‘ will show in the digital temperature
display indicating the styler is in standby mode.
•
Press and hold the power on/off button to switch on.
The digital temperature display will show a flashing blue illumination
and flashing bars, indicating the straightener is heating up to the
default temperature.
Note:
Temperature setting will default to 190ºC.
•
Once the default/selected temperature has been reached, the blue
illumination and bars in the digital display will become solid.
•
To select a higher/lower temperature, press the ‘+’ or ‘-’ temperature
increase/decrease button.
CAUTION:
Take extra care when using the straightener, as it can get very
hot. It is important to establish the correct temperature for your hair type
prior to use, to prevent over drying or damage to your hair. If in any doubt,
start with the low temperature setting first, and increase the temperature
gradually by pressing the “+” temperature increase button.
