Remington MB7000, Manual

Page: 4 / 116

4
ENGLISH
PARTS
1. On/Off switch
2. Fuel gauge
3. Precision T-blade
4. Charging connector
5. Micro detail blade
6. Fixed combs (x6)
7. Precision dial comb (1 - 5 mm)
Not shown
• Adaptor
• Storage pouch
CHARGING YOUR APPLIANCE
Before using your trimmer for the first time, charge for 4 hours.
1. Ensure the product is switched off.
2. Connect the charging adaptor to the product and then to the mains.
FUEL GAUGE
Charge Level
Fuel Gauge Lights
During Charging During Use
Charging
Lights will cycle in an
upwards pattern
-
Fully Charged
All lights will remain lit for 5
minutes and then switch off
Lights will cycle in an
upwards and downwards
pattern
Battery charge is low (3
minutes or less run
time available)
- Bottom light will flash
• In addition, the fuel gauge shows the level of charge for 5 seconds after the unit has
been switched off after use.
Lights Remaining Charge Level
Bottom light will flash Battery charge low
Bottom light on 33%
Bottom and middle light on 33 - 66%
All lights on 66 - 100%
• Run time from fully charged is up to 60 minutes.
• Unplug the charger when the unit is fully charged .
• To preserve the life of your batteries, let them run out every 6 months then recharge
for 4 hours.