![background image](http://html.mh-extra.com/html/remington/mb6850au/mb6850au_use-and-care-manual_1437380006.webp)
6
TRIMMER ATTACHMENTS
CHANGING THE MAIN AND DETAIL BLADES
Your trimmer is supplied with the main blade already fitted. It is easier to
remove and refit the main blade with the vacuum chamber removed.
•
Switch your trimmer off.
•
Hold the trimmer in one hand.
•
Push the top of the blade away from the trimmer body using your thumb.
(Fig A)
•
Use enough force to free the blade from
the trimmer body. Once free, lift it off.
•
Fit the desired blade by engaging the
tab on the back of the blade into the
rear of your trimmer. Press the front of
the blade down until it clicks.
•
Replace the vacuum chamber.
FITTING/REMOVING THE ADJUSTABLE BEARD COMB
•
Switch your trimmer off.
•
Depress the comb lock button then slide the adjustable comb into the guides
on the rear of your trimmer. Slide the comb all the way down then release the
button.
•
To adjust the length of the beard comb, depress the comb lock button then
slide the comb to the desired length.
•
The Adjustable Beard Comb attachment has 8 Length settings: 2-16mm (in
increments of 2mm). Begin with a higher numbered setting. Adjust cutting
length as desired once you are familiar with using the trimmer, it is better to
select a longer hair length setting in order not to trim too much hair.
A
Summary of Contents for MB6850AU
Page 7: ......