7
C
CARE FOR YOUR BEARD TRIMMER
•
Your beard trimmer is fitted with high quality blades.
•
To ensure long lasting performance of your clipper, clean the blades and
unit regularly.
,
AFTER EACH USE
•
Ensure the beard trimmer is switched off and disconnected from the mains
before cleaning.
•
Brush the accumulated hair from the blades.
•
To clean unit, wipe with a damp cloth and dry immediately.
•
Do not submerge the clipper in water.
•
Empty vacuum chamber and rinse under running tap.
,
WASHABLE ATTACHMENT HEADS
•
The washable attachment heads are designed to ensure easy maintenance
of your beard and grooming kit
•
Ensure each of the attachment heads are removed from the beard trimmer.
•
Wash the heads under a running tap to remove any hair clippings. Do not
run the entire unit under the tap.
•
Once dry, place desired attachment head on top of the unit.
,
Note: Ensure the clipper is turned off when cleaning.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the supply mains when removing
the battery.
•
Ensure that the clipper is discharged of all power and disconnected from the
mains
•
Lift or pry the top housing and remove the top housing.
•
Unscrew the 2 screws located on the printed circuit board assembly.
•
Lift or pry the clipper halves apart, exposing the battery chamber.
•
Take out the battery and printed circuit board assembly from the battery
chamber.
•
Cut the tabs on both ends of the battery and remove it from the printed
circuit board
•
The battery is to be disposed of safely.
