8
USING THE EDGEStyler
The EDGEStyler
tool is used to guide your trimmer to create a symetrical, defined edge to
your beard.
Neck Line (Fig. A)
Hold the appropriate curved side of the tool underneath your jaw and run your trimmer
along it for a clean edge. Repeat on the other side then even up the remaining V left
under the chin freehand.
Cheek (Fig. B)
Hold the appropriate curved side of the tool against the cheek and run your trimmer
along it for a clean edge. Repeat on the other side of your face.
Sideburn (Fig. C)
Use the straight edge of the tool against the sideburn for perfect, straight edges.
Moustache (Fig. D)
Use the curved edge of the tool to sculpt the moustache area.
CARING FOR YOUR TRIMMER
• To ensure long lasting performance of the trimmer, clean the blades and unit
regularly.
• Ensure the appliance is switched off and unplugged from the mains.
• Do not use harsh or abrasive cleaners on the unit or blades.
• This product has washable blades. Ensure the blades are detached from the trimmer
before washing the blades.
BLADE RELEASE
1. Ensure the trimmer is switched off.
2. Remove the adjustable comb.
3. Remove the blades by pushing your thumb upwards under the blades and move the
blade set away from the trimmer body.
4. To reattach the blades, align the back of the blades with the back housing at the top
of the trimmer and push down until the blade clicks into place.
CLEANING
• Wash the blades under a running tap to remove any hair clippings.
• After rinsing under a tap ensure the blades are dry.
• Do not rinse while the product is connected to the charger.
• Please note the main body of the trimmer is not washable and should be kept away
from water.
Summary of Contents for MB350L
Page 2: ...2 e f g j k l i m ...
Page 3: ...3 A C B D ...
