![background image](http://html.mh-extra.com/html/remington/mb340c/mb340c_manual_1437330006.webp)
6
TRIMMING EDGE OF SIDEBURNS
•
Remove the trimmer comb attachment.
•
Start with edge of sideburn and with the trimmer blades resting lightly
against your skin, use motions towards edge of sideburn line to trim the
desired locations in facial area.
•
For finer shaping, raise the pop-up trimmer. Shape as desired.
• To raise the pop-up trimmer, remove the adjustable comb and then slide up
the pop-up trimmer release button which sits below the pop-up trimmer.
• To retract the pop-up trimmer, slide down the pop-up trimmer release
button.
TRIMMING THE NAPE OF YOUR NECK
Note: You will need a hand mirror for this operation if performing it alone.
• Remove the trimmer comb attachment.
• Use your fingers to lift the hair at the base of your head up off the neck. Your
index finger should be covering the roots of the hairs you are lifting to
prevent accidental removal by trimmer.
• Using your other hand, hold the trimmer to the base of your neck with the
cutting unit facing up and move the trimmer up the length of the neck until
it touches your finger, covering the hair roots at the base of your head.
• Be sure to move the unit slowly when performing this operation and to keep
the hair roots at the base of your head out of the way of the trimmer.
REMOVING THE CUTTING ASSEMBLY
• Remove the cutting assembly by firmly pushing up on the blade with your
thumb.
REPLACING THE CUTTER ASSEMBLY
•
Hold the trimmer in one hand. With your other hand, insert the lower part of
the cutter assembly into the trimmer, push down the cutter until firmly
attached.
TIPS FOR BEST RESULTS
•
Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before use.
• Comb your hair in the direction that it grows.
• Remove the trimmer comb attachment if you are; defining hairline edges
such as sideburns, trimming the nape of your neck or trimming your beard
line on front of neck.
ENGLISH