![background image](http://html.mh-extra.com/html/remington/indestructible-hc5880/indestructible-hc5880_user-manual_1437894005.webp)
5
F
INSTRUCTIONS FOR USE
,
Before starting the cut
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level.
• Before cutting, always comb the hair so it is tangle free and dry.
,
TO ATTACH A COMB
• Hook front side of attachment comb on front side of teeth.
• Press back side of comb downwards, until the tab clicks into place.
,
TO REMOVE THE COMB
• Press upward on the tab to release the comb.
• With tab released, pull comb away from clipper and unhook front of the
blade.
,
INSTRUCTIONS FOR CUTTING HAIR
• For even cutting, allow the comb attachment/blade to cut its way through
the hair. Do not force it through quickly. If you are cutting for the first time,
start with the maximum comb attachment.
,
STEP 1 – Nape of the neck
• Attach the 3mm or 6mm fixed comb
• Hold the clipper with the blade teeth pointing upwards. Begin starting at the
centre of the head at the base of the neck.
• Slowly lift the clipper, working upwards and outwards through the hair,
trimming just a little at a time.
,
STEP 2 – Back of the head
• With the 12mm or 16mm guide comb attached, cut the hair at the back of
the head.
,
STEP 3 – Side of the head
• With the 3mm or 6mm guide comb attached, trim sideburns. Then change to
the longer 9mm guide comb and continue to cut the top of the head.
,
STEP 4 – Top of the head
• Use the longer length fixed combs of 22mm or 25mm to cut hair on top of
the head against the direction in which the hair normally grows.
• Always work from the back of the head.
ENGLISH
GB
D
NL
F
E
I
DK
S
FIN
P
SK
CZ
HUN
PL
RU
TR
RO
GR
SL
AE
HR
UA