14
Test The i-LIGHT® Smooth Sense On Your Skin
Before your first full treatment, test the i-LIGHT® Smooth
Sense on a small patch of skin and wait 24 hours to ensure
there are no adverse reactions.
1. Select your preferred mode and wait until the Skin Tone
Tester lights blink to amber before placing device on the
skin.
TIP:
As mild to moderate discomfort is normal, you
may want to start with Sensitive Mode only switching to
Power Mode when you feel comfortable in doing so (Fig
12).
2. Place the i-LIGHT® Smooth Sense hand piece against your skin so the Flash Window is flush
with the skin surface.
3. Ensure the Skin Contact Sensors are fully engaged (Fig 13) and that the LED lights illuminate
white and you hear a ticking sound.
4. Press the Flash Button to deliver a flash.
5. Wait 24 hours and then look at the test area. If the skin appears normal, proceed with your
first full treatment using the mode that you determined is right for you.
NOTE:
You must test the device on each area of the face or body you wish to treat.
TREATMENT
Changing Attachments During Treatment
• Your i-LIGHT® Smooth Sense comes with two separate Treatment Caps.
• The Body Treatment Cap is for use on larger areas such as body hair (Fig 14).
• The Precision Treatment Cap is intended for use on smaller areas such as female facial hair,
underarms and bikini area (Fig 15).
Fig 13
Fig 14
Body Treatment Cap
Fig 15
Precision Treatment Cap
3
I
II
III
IV
V
VI
HAIR COLOUR
SKIN COLOUR
