Remington i-LIGHT PRO, Use And Care Manual

Page: 19 / 55

36 37
When a REPLACEMENT CARTRIDGE
has reached 90% of its possible
lifetime, the CARTRIDGE STATUS
INDICATOR DISPLAY on the control
panel will turn yellow, indicating that
the REPLACEMENT CARTRIDGE should
soon be replaced. Once all of your
device flashes in a REPLACEMENT
CARTRIDGE have been used, the
CARTRIDGE STATUS INDICATOR
DISPLAY will flash yellow, indicating
that further flashes cannot be
delivered. In order to continue the hair
removal session, it will now be
necessary to replace the
REPLACEMENT CARTRIDGE.
Note: A REPLACEMENT CARTRIDGE
should also be replaced if the lamp tube
is broken.
DO NOT attempt to open or repair your
Remington iLIGHT device. Only authorized
Remington repair centers are permitted to
perform repairs.
REPLACING THE REPLACEMENT
CARTRIDGE
The number of flashes your
REPLACEMENT CARTRIDE can deliver is
based on the model of your Remington
iLIGHT Hair Removal System. See
Table 3. The number of flashes your
device emits is not dependent on the
energy level setting. Flash intensity
is determined only according to the
energy level setting of the device.
There is no significant decrease of
energy during the usable lifetime of the
REPLACEMENT CARTRIDGE.
Flash Bulb Usage 0 – 90% 90 – 100% 100%
CARTRIDGE STATUS
INDICATOR DISPLAY
Lamp Life Light Flash
& Audible Tone
Lamp Life icon will
be lit solid GREEN,
with no audible
tone.
Lamp Life icon will
be lit solid YELLOW,
with no audible
tone.
Lamp Life icon will
flash YELLOW, with
an audible beep
every 0.5 seconds
until cartridge is
replaced.
Table 3
After Your Remington
®
iLIGHT
®
Hair Removal System Treatment