background image

•  When finished, rinse your face and check for any hairs that may have been 

missed for quick touch up.

•  When using your shaver with foams or gels it is important to rinse the cutting 

head clean after each use. This will avoid having the gels dry in the cutting 

head and clogging the shaver. Refer to the cleaning instructions to keep your 

shaver cutting at peak performance.

Dry Shaving

•  Dry shaving is a fast and low mess way to shave.
•  Press the power button to turn the shaver on.
•  Place the shaver cutting head against your skin with all three cutters touching 

your skin.

•  Pressing lightly against your skin, move the shaver head in slow, small 

circular motions.

•  Hairs on your face and neck may grow in different directions. Moving your 

shaver against the direction of hair growth will be most effective.

•  You may use your free hand to gently stretch your skin tight which can aid in 

making hairs stand up to more easily enter the cutting slots.

•  To trim sideburns or edges of goatees or beards, press the pop-up trimmer 

release button to activate the trimmer. Place the trimmer blade parallel with 

your skin and use downward strokes to cut.

•  Refer to the cleaning instructions to keep your shaver cutting at peak performance.

 Cleaning and Care

Note: When cleaning your shaver, make sure the shaver is turned off and 

disconnected from the charging base. 

•  Your HyperFlex shaver is built to be watertight. This makes clean up fast and 

easy as it is safe to rinse the shaver body and head under running water. 

•  Do not use strong detergents or chemicals to clean your shaver. Water alone 

or with mild anti-bacterial soap is recommended.

•  Do not place your shaver in the dishwasher.

Daily Cleaning

1.  Pull the rotary cutter face off of the cutting head, (C) and (D). This will expose 

the hair pocket where shaven hair particles are collected.

2.  Tap out excess shavings in the sink or waste basket (E).
3.  Rinse both the cutter face and hair pocket under warm running water to rinse clean.
4.  Snap the cutter face back onto the shaver.

Weekly Cleaning

1.  A more thorough cleaning of the cutters on a weekly basis will add to the life 

and performance of your shaver.

2.  Pull the rotary cutter face off of the cutting head, (C) and (D). This will expose 

the hair pocket where shaven hair particles are collected.

C

E

D

F

G

H

I

J

K

3.  Tap out excess shavings in the sink or wastebasket (E).
4.  Release the blue inner cutter support by sliding it out of the snap lock. Note the 

small triangle at the center of the blue support. With your fingertip, slide the blue 

support back to release the snap. (F) (G)

5.  Remove the inner cutters from the individual cutting heads. (H) Note that the hubs 

of the cutters are color coded to match the color of the outer cutters. The cutters 

should be mated with their matching color for best performance and life.

6.  Thoroughly rinse away any small debris from both the inner and outer cutters 

and hair pocket.(I)

7.  Replace the inner cutters. Remember to match the color coded hubs. (J)
8.  Replace the blue inner cutter support. Be sure it securely snaps back in under 

the small triangle at the center of the cutting head. (K)

9.  The cutter assemblies may be lubricated with a single drop of household oil.
10. Snap the cutter face back onto the cutting head base.

When your rechargeable shaver reaches the end of its useful life, the LiFePO4 

batteries must be removed from the shaver and be recycled or disposed of prop-

erly in accordance with your state and local requirements. If this is not required 

by law, you may elect to dispose of the shaver with the batteries.

CAUTION!

 Do not put in fire or mutilate your batteries when disposing as they 

may burst and release toxic materials. Do not short circuit as it may cause burns. 

Dispose of properly in accordance with your local and state requirements.

To Remove the Rechargeable Battery:

1.  Unplug the shaver
2.  Run shaver until the motor stops
3.  Remove the head from the shaver (Pull head up and off)
4.  Using a small screwdriver, pry the ‘collar’ off of the top of the handle
5.  Using a small screwdriver, pry the front cover from the body
6.  Remove three screws located on front of shaver
7.  Using a small screw driver, pry up the newly unsecured inner housing to 

expose the battery

8.  Pry battery free from circuit board
9.  Dispose of battery properly

 Product Disposal

Questions or comments: 

Call 800-736-4648 in the US or 800-268-0425 in 

Canada. Or visit 

RemingtonProducts.com

Dist. by: Spectrum Brands, Inc., Middleton, WI 53562

Dist. by: Spectrum Brands Canada, Inc.,  

131 Saramia Crescent, Vaughan, ON L4K 4P7
® Registered Trademark and TM Trademark 

of Spectrum Brands, Inc. 

© 2015 Spectrum Brands, Inc. 8/15 13521-00
Made in China

T22-0003730

By registering your new Remington

®

 product you will receive these important 

benefits:

•  Proof of ownership

•  Product protection

•  Product registration

•  Special offers

Register online at: RemingtonProducts.com

 Product Registration

 Shaver Replacement Parts

To keep your HyperFlex shaver working at peak performance, it is recommended 

that you replace the cutting head after every 12-18 months of use.  Indication 

that your shaver may need to have the cutting head replaced would be if you 

notice an increase in irritation of your skin after you shave or you feel hair pulling 

due to dull cutting blades.

The replacement cutting head for your shaver is model number SPR-XR14

Shaver Accessories

Remington also offers these additional attachments that fit 

your HyperFlex shaver.  These attachments easily snap on 

and off interchangeably with your shaving head.

Groomer attachment with adjustable length settings:  SPR-XT

•  If you like to wear a beard, goatee, or stubble look, the groomer head will trim 

your facial hair to adjustable lengths between .5 mm and 5 mm.

Facial Brush attachment:  SPR-XFB

•  The facial brush attachment is used for deep cleaning and exfoliating for 

healthy facial skin.  Two brush types are available.

 

SPR-XFM Massage Brush 

 

SPR-XFN Cleansing Brush

How to Order Parts and Accessories

Two easy ways to order spare parts and accessories are available.
•  Order by Phone:

 

U.S. Residents: 1-800-392-6544 

 

Canadian Residents: 1-800-268-0425

•  Order Online: 

 RemingtonProducts.com

Limited Two-Year Warranty

Spectrum Brands, Inc. warrants this product against any defects that are due to faulty 

material or workmanship for a two-year period from the original date of consumer 

purchase. This warranty does not include damage to the product resulting from 

accident or misuse. If the product should become defective within the warranty 

period, we will replace it free of charge. Return your product and sales receipt with 

your name, address and day time phone number to: 

Remington Returns Center,  

507 Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more information call  

800-736-4648 in the US or 800-268-0425 in Canada.

Warranty excludes: 

  Heads and cutters

KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY 

PURPOSES.

This warranty does not cover products damaged by the following:

■ 

Accident, misuse, abuse or alteration of the product

■ 

Servicing by unauthorized persons

■ 

Use with unauthorized accessories

■ 

Connecting it to incorrect current and voltage

■ 

Wrapping cord around appliance causing premature wear & breakage

■ 

Any other conditions beyond our control

SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, 

SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 

PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED 

WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO 

TWO YEARS FROM DATE OF ORIGINAL PURCHASE.

This warranty gives you specific legal rights and you may also have other rights 

which vary from state to state or province to province. Some states do not allow 

the exclusion or limitation of incidental, special or consequential damages.

 Warranty

 Performance Guarantee

Spectrum Brands, Inc. Money-back Offer

If within 30 days after you have purchased your Remington® branded product, 

you are not satisfied and would like a refund, return it with the sales slip indicating 

purchase price and date of purchase to the retailer from whom it was purchased. 

Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30 

days from the date of purchase. If you have any questions concerning the money-

back guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada.

Remington Guarantees Satisfaction After 30 Days!

Remington Men’s Shave and Groom 60-Day Money Back Guarantee*

If within 60 days after purchasing any Remington

®

 branded Men’s Shave and 

Groom product, you are not completely satisfied and would like a refund, return 

it with the original dated sales receipt directly to Remington and receive a full 

refund.** For questions concerning the money-back guarantee, please call  

800-736-4648 in the US or 800-268-0425 in Canada.

*Applies to US and Canadian customers’ returns only.

**Terms and conditions apply.

Terms and Conditions

1. Refund will be in the form of a check issued in US Dollars and will be provided 

only if all Terms and Conditions are met. 

2. The following items must be returned to Remington and postmarked no later 

than 60 days after purchase of the Remington

®

 branded Men’s Shave and 

Groom product: 

 

a. The Remington

®

 

product; 

 

b. The original sales receipt indicating price and date purchased; and

 

c. The completed 60-day money back guarantee form located at  

  

RemingtonProducts.com/60day.

3. In addition, Remington, in its discretion, must determine that the returned 

product was used in accordance with the instruction booklet (included with the 

product at the time of purchase).

4. Returns should be mailed prepaid (no collect returns accepted) to:

 

Remington 60-Day MBG

 

507 Stokely Drive, Box 1

 

DeForest, WI 53532

5. Refund does not include postage costs for the return of the product, but will 

include applicable taxes paid by customer, if any. 

6. No responsibility will be accepted for late, lost, stolen, misdirected or 

damaged product. 

7. Please allow 4-6 weeks to receive your refund by check.

Contains a Listed Adaptor

Reviews: