![background image](http://html.mh-extra.com/html/remington/hyperflex-xr1340f/hyperflex-xr1340f_manual_1437308004.webp)
4
C
GETTING STARTED
It is recommended that you use your new shaver daily for up to four weeks to
allow time for your beard and skin to become accustomed to the new shaving
system.
,
CHARGING STAND
•
Rotate open the charge stand fully to stand firmly on a flat surface while
charging. For travel you can fold the stand around the shaver (see below).
,
CHARGING YOUR SHAVER
•
Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
• Place the shaver in the charging stand.
• Charge for at least 24 hours when using for the first time.
• Allow 4 hours for a full charge.
• When charge is low, the top LED will illuminate a solid red light. When
charging the bottom LED will illuminate a solid green light. When fully
charged both LEDs will be off.
• To preserve the life of your batteries, let them run out every 6 months then
recharge for 24 hours.
• The shaver automatically adjusts to a mains voltage between 100V and 240V.
• This appliance should be charged by approved safety isolating adaptors
PA-0510E with the output capacity of 5.0V dc; 1.0A.
ENGLISH
Summary of Contents for HyperFlex XR1340F
Page 1: ...XR1340F ...