5
•
The adaptor automatically adjusts to a mains voltage between 100V and
240V.
•
This appliance should be charged by approved safety isolating adaptors
PA-0510E(K) with the output capacity of 5.0 dc; 1.0A.
F
INSTRUCTIONS FOR USE
,
SHAVING
,
Note: This shaver is for cordless use only.
•
Make sure your shaver is properly charged.
•
Switch the shaver on.
•
Stretch the skin with your free hand so the hairs stand upright.
•
Only apply light pressure on the shaving head while shaving (pressing too
hard can damage the heads and make them vulnerable to breakage).
•
Use short, circular strokes.
,
SHAVING WITH SHAVING GEL
•
Follow the same instructions as dry shaving if using shaving gel.
,
CAUTION
•
After use with shaving gel, please rinse the head and cutters under warm
water to clean away any excess gel and debris.
,
TRIMMING
•
Push the trimmer button to release the detail trimmer.
•
Hold the trimmer at a right angle to your skin.
•
Place the trimmer at desired trim line for a quick, easy, professional trim.
•
To retract the trimmer, push down until it locks into position.
E
Tips for best results
•
Use moderate to slow stroking movements. The use of short circular
motions in stubborn areas may obtain a closer shave, especially along the
neck and chin line.
•
DO NOT press hard against the skin in order to avoid damage to the rotary
heads.
,
CHANGING SHAVE / GROOMING HEADS
•
The shaver should be switched off when changing heads.
•
Grasp the shave head at the blue collar and pull up to unsnap the head
from the handle.
•
Attach the interchangeable heads to the handle by aligning the hexagon
shapes of the head to the handle, then pressing together to snap in place.
