4
PARTS
1. On/off switch
2. Adjustable Comb (3-15mm)
3. Adjustable Comb (18-30mm)
4. Length position indicator
5. Zoom wheel
6. Charging indicator light
7. Hair texture switch
8. Rotary trimmer
9. Precision trimmer
10. Battery compartment
Not Shown:
• Adaptor
• Cleaning brush
• Oil bottle
GETTING STARTED
CHARGING YOUR APPLIANCE
• Before using your hairclipper for the first time, charge for 16 hours.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
• When charging, the charge indicator light will light up.
• If the product is not going to be used for an extended period of time (2 – 3 months),
unplug it from the mains and store.
• Fully recharge your hairclipper when you would like to use it again.
• Allow 16 hours for a complete charge.
• Note: To preserve the life of your batteries, let them run out every 6 months then fully
charge.
CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
CORDED USE
• Connect the charging adaptor to the product then to the mains.
• When connected, the charge indicator light will light up.
CAUTION Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
• When the product is switched on and fully charged it can be used in cordless mode for
up to 45 minutes.
INSTRUCTIONS FOR USE
BEFORE STARTING THE CUT
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level.
• Before cutting, always comb the hair so it is tangle free and dry.
ENGLISH
