Remington HC6000AU Manual Download Page 6 | Manualshive

Page: 6 / 12

Remington HC6000AU Manual Download Page 6

During corded use:

When the unit is plugged in, the corded indicator
icon will show ( ). Normal operating speed:

When the unit is plugged in, the corded indicator
icon will show ( ). Turbo mode:

During cordless use:

The display will show the remaining run time in
minutes. When the run time reaches 5 minutes it
will flash.

When in turbo mode, the display will be the same
as above with the turbo symbols (>>>)

•

The clipper comes with a quick charge function, 10 minutes charging
will give an emergency burst of run time.

CHARGING VIA STANDARD ELECTRICAL SOCKET

•

Ensure the product is switched off.

•

Connect the charging adaptor to the product and then to the mains.

USB

•

Connect Micro USB to the appliance, and the USB connector to any
standard USB port or charger

•

Product will only charge through USB and will not run in corded mode.

CORDED USE

•

Connect the charging adaptor to the product then to the mains.

Note:

Extended mains only use will result in the reduction of the battery life.

CORDLESS USE

•

When the product is switched on and fully charged it can be used in
cordless mode for up to 90 minutes.

6

«
...
4
5
6
7
8
...
»

Summary of Contents for HC6000AU













Reviews:

No comments