![background image](http://html.mh-extra.com/html/remington/hc5400/hc5400_manual_1437861004.webp)
4
ENGLISH
C
GETTING STARTED
,
CHARGING YOUR APPLIANCE
• Before using your hairclipper for the first time, charge for 16-20 hours.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
• If the product is not going to be used for an extended period time (2 – 3
months), unplug it from the mains and store.
• Fully recharge your product when you would like to use it again.
•
Allow 16 hours for a full charge on the HC5400 and 4.5 hours on the HC5600 and
HC5800.
• To preserve the life of your batteries, let them run out every 6 months then
recharge for 16-20 hours.
O
This appliance should be charged by approved safety isolating adaptors
PA-3215E (for HC5400 EU version) or PA-3215U (for HC5400 UK version) with the
output capacity of 3.2V dc; 1500mA; and should be charged by approved safety
isolating adaptors
PA-4515E (for HC5600, HC5800 EU version) or PA-4515U (for HC5600,HC5800 UK
version) with the output capacity of 4.5V dc; 1500mA .
,
QUICK CHARGE (HC5600 & HC5800)
Quick charge
time
10 minutes
30 minutes
1 hour
2 hours
Run time
5 minutes
15 minutes
30 minutes
40 minutes
,
CHARGING VIA CHARGING STAND (HC5800)
• Ensure the product is switched off.
• Connect the charging adaptor to the charging stand and then to the mains.
• Allow 4.5 hours for a full charge.
,
CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
•
Allow 16 hours for a full charge on the HC5400 and 4.5 hours on the HC5600 and
HC5800.