6
STEP 5 – THE FINISHING TOUCHES
•
Use the clipper without an attachment comb for close trimming around the base
and sides of the neck.
•
To produce a clean straight line at the sideburns, reverse the hair clipper.
Place the reversed clipper at right angles to the head, tips of the blades lightly
touching the skin and then work downwards.
SHORT TAPERED STYLES – “FLAT TOPS” & SHORT CUTS
•
Starting with the longest guide comb attached (25mm), cut from the back of the
neck to the crown. Hold the guide comb flat against the head and slowly move the
clipper through the hair.
•
Use the same procedure from the lower side to the upper side of the head.
Then cut the hair against the direction in which it grows and level with the sides.
•
To give a “flat top” look, the hair on top of the head must be cut over the top of a flat
comb.
•
Use a closer guide comb to taper the hair down to the neckline as desired.
TAPER LEVER
This product has a taper lever located a the left side of the clipper near the blades. Adjust
the lever to change the closeness of the cut gradually and also to improve the
effectiveness of the comb attachments. The taper lever also extends the life of the blades
because a different cutting edge is used in each setting.
TRIMMER
TO DEFINE THE BEARD/MOUSTACHE LINE
•
Hold the trimmer with the trimmer blade facing you.
•
Start with the edge of the beard/moustache line and gently lower the trimmer
blade onto your skin. Use motions towards edge of beard/moustache line to trim
the desired locations in facial area and away from beard in the neck area.
TRIMMING EDGE OF SIDEBURNS
•
Hold the trimmer with the trimmer blade facing you.
•
Start with the edge of the sideburn and with the trimmer blades resting lightly
against your skin, use motions towards edge of the sideburn line to trim to the
desired locations in the facial area.
CARE FOR YOUR HAIRCLIPPER
•
Your clipper is fitted with high quality blades.
•
To ensure long lasting performance of your clipper, clean the blades and unit
regularly.
•
Always keep the attachment guide comb on the trimmer blade.
Note
: Ensure the clipper is turned off when cleaning.
