7
,
HAIR TEXTURE MECHANISM
•
Blending different length areas. Select the proper length guard to blend.
Slide out the hair texture mechanism (guard) which allows you to blend /
thin out the area.
•
Textured cut – Slide out the hair texture mechanism (guard) to give an all
over textured cut.
,
LONG HAIR TEXTURE
•
Technique 1: twist a small section of hair into a bunch. Slide out the hair
texture mechanism, with one or two passes in a roll out motion, cut ends of
hair. Be careful not to cut completely through the bunch. When the hair is
un-twisted it will have a professional looking texture finish.
•
Technique 2: using a comb, brush hair upward through the comb exposing
only the ends of the hair. With the hair texture mechanism in position, cut
just the ends of the hair with one or two passes using a rolling motion. Be
careful not to cut completely through the hair.
C
CARE FOR YOUR HAIRCLIPPER
•
Your clipper is fitted with high quality blades.
•
To ensure long lasting performance of your clipper, clean the blades and
unit regularly.
•
Always keep the attachment guide comb on the trimmer blade.
,
AFTER EACH USE
•
Ensure the appliance is switched off and unplugged from the mains before
cleaning.
•
Brush the accumulated hair from the blades. Do not submerge the clipper in
water.
•
To clean the unit, wipe with a damp cloth and dry immediately.
,
Note: Ensure the clipper is turned off when cleaning.
,
WASHABLE CLEANING
•
The QUICK WASH SYSTEM is designed to maximise the efficiency of
washable cleaning.
•
Click the buttons that are located on the sides of the hair clipper head. The
blades will slide out and the blade set can easily be cleaned under the tap.
•
Once the blades are cleaned the blades are locked into place by pushing the
blade set towards the hair clipper head and will snap into place.
•
Do not run the entire unit under the tap, only the blade set is meant to be
submerged in water.
