4
•
Keep the power plug and cord away from heated surfaces.
•
Do not leave the appliance unattended while plugged in.
•
Do not place the appliance on any soft furnishings.
•
Do not use attachments other than those we supply.
•
Do not set the appliance down while still on.
•
Do not twist or kink the cable, or wrap it round the appliance.
•
Do not use the appliance if it is damaged or malfunctions.
•
Check the cord regularly for any sign damage.
•
Always keep the lid closed while the rollers are heating.
•
Ensure there is a roller on each slot while the unit is heating and that each roller is
properly inserted into the base unit.
•
DO NOT USE ON ARTIFICIAL HAIRPIECES OR WIGS.
•
This appliance is not intended for commercial or salon use.
PARTS
1. Velvety flocked rollers:
- 4 x 40mm rollers (large)
- 8 x 35mm rollers (medium)
2. Colour coded clips (not shown)
3. Colour coded pins (not shown)
4. On indicator light
5. Cool touch end
6. Base unit
INSTRUCTIONS FOR USE
Before use, ensure the hair is clean, dry and tangle-free.
•
For extra protection use a heat protection spray.
•
Hairsprays contain flammable material – do not use while using this product.
•
Section the hair prior to styling. Style the lower layers first.
•
Plug the product into the mains power supply.
•
CAUTION : the appliance will begin to heat-up as soon as the power supply is
switched on.
•
The lid should be in the down position until the rollers are ready to use.
•
The rollers will start to heat up in 3 minutes. Allow 10 minutes for them to reach the
optimal curling temperature.
•
When you feel your setters are ready, open the lid for 1 minute and begin use.
TO CURL
1. Select the desired size of roller. Use the small rollers for tighter curls; the larger
rollers give looser curls and waves.
2. Take a section of hair, about the width of the roller.
3. Wrap the ends of the hair around the roller, keeping the hair at right angles to the
scalp.
4. Wind the roller right down to the roots.
Summary of Contents for H5670
Page 2: ...e j k i...
