Monthly Cleaning:
1.
Perform the daily
cleaning steps 1-4.
2.
Place a drop of
liquid soap on
each cutter and
in the hairpocket.
(Diagram M)
3.
Brush the soap
around vigorously
with the supplied
cleaning brush.
Be sure to work
the soap into the
corners of the
hairpocket and into
any especially dirty
cutters.
(Diagram N)
4.
Add a small amount
of water to the
cutters.
5.
Replace the foil
assembly.
(Diagram O)
6.
Turn on the shaver
for approximately
30 seconds.
7.
While the shaver is running, rinse
the foils under running water.
(Diagram P)
8.
Turn off shaver.
9.
Remove foil assembly. (Diagram H)
10
.Rinse the cutters, hairpocket,
and foil assembly thoroughly.
(Diagram Q)
11
. Shake off excess water.
12
. Replace foil assembly.
(Diagram O)
13
. Allow shaver to dry before next use.
Pop-up
release
switch
1
■
Do not remove or replace head
assembly while shaver is running
as it may cause damage to the
unit’s foils and cutters.
■
To clean the external surfaces of
the shaver, use a damp cloth. Do
not use strong detergents or other
chemicals.
■
To dry, wipe the surface of the
shaver with a dry towel. Do not use
a hair dryer or heater to dry the
shaver.
■
The shaver should not be used until
it has dried.
■
This product contains no user
serviceable parts.
The shaver is a
washable appliance.
The head assembly
part may be cleaned
under water.
Trim
Cleaning & Care
NOTE:
**When cleaning your
shaver, make sure the shaver is
turned off and disconnected from
the power cord.**
For optimal shaver performance,
clean your shaver after each use.
CAUTION!
■
Shaver can be placed under running
water for cleaning only. Never
submerge the shaver in water.
Your Remington
®
electric shaver fea-
tures a pop-up trimmer.
■
Make sure shaver is turned off.
■
Place thumb on Pop-up Release
switch and push up.
■
Turn on shaver to engage trimmer.
■
When finished, turn shaver off.
■
Place thumb on Pop-up Release
switch and pull down.
2
3
Daily Cleaning:
1.
Place thumb and
pointer finger on
Foil Assembly
Release Buttons
and push inward.
(Diagram H)
With your other
hand, pull Foil
Assemly upward,
exposing cutters.
2.
Tap the stubble
from the foils and
cutters.
3.
Use the cleaning
brush to sweep
any loose hairs
from the cutters,
hairpocket, and
trimmer. Pay
close attention
to cleaning out
the corners and
crevices inside
the hairpocket.
(Diagrams I – J)
4.
After cleaning,
replace the Foil Assembly.
(Diagram L)
L
J
H
I
K
P
N
O
Q
When your rechargeable shaver reach-
es the end of its useful life, the batter-
ies must be removed from the shaver
and recycled or disposed of properly in
accordance with your state and local
requirements. If this is not required by
law, you may elect to dispose of the
shaver with the batteries.
CAUTION!
Do not put in fire or muti-
late your batteries when disposing
as they may burst and release toxic
materials. Do not short circuit as it
may cause burns. Dispose of properly
in accordance with your local and
state requirements.
To Remove the Rechargeable Battery:
1.
Remove the Cutter Assembly and
cutters.
Battery Removal
2.
Insert small flathead screwdriver
into small opening at the top of the
panel located on left side of shaver
with on/off button facing toward
you.
3.
Loosen and remove the six screws
with a Phillips screwdriver, and
remove the rear housing.
4.
Cut the lead wires, remove the
four screws with a Phillips head
screwdriver, and remove the battery
cover.
5.
Take out the Ni-MH battery, and cut
the lead wires while taking care
not to short-circuit the (+) and (-)
terminals.
6.
Dispose battery property in
accordance with your state and
local requirements.
Maintain your shaver’s peak
performance! Keep your shaver
performing like new!
■
Because your satisfaction is
important to us, we make it simple
for you to keep your new shaver
performing at its peak.
■
Remington makes this easy!
Two easy ways to order!
1.
Call!
800-392-6544
2.
Order Online at
www.RemingtonProducts.com
Warranty
Product Registration
By registering your new Remington
product you will receive these
important benefits:
■
Proof of ownership
■
Product protection
■
Product registration
■
Special offer
Register online at:
www.RemingtonProducts.com
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this
product against any defects that are
due to faulty material or workmanship
for a two-year period from the original
date of consumer purchase. This
warranty does not include damage to
the product resulting from accident or
misuse. If the product should become
defective within the warranty period,
we will replace it free of charge.
Return your product and sales receipt
with your name, address and day time
phone number to: Remington Returns
Center, 507 Stokely Dr., P.O. Box 1,
Deforest, WI 53532. For more infor-
mation call 800-736-4648 in the US
or 800-268-0425 in Canada.
Warranty excludes:
■
Foils and cutters
KEEP ORIGINAL SALES RECEIPT
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
This warranty does not cover
products damaged by the following:
■
Accident, misuse, abuse or
alteration of the product
■
Servicing by unauthorized persons
■
Use with unauthorized accessories
■
Connecting it to incorrect current
and voltage
■
Wrapping cord around appliance
causing premature wear & breakage
■
Any other conditions beyond our
control
SPECTRUM BRANDS, INC.
SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OF FITNESS
AND MERCHANTABILITY, ARE LIMITED
IN DURATION TO TWO YEARS FROM
DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state
or province to province. Some states
do not allow the exclusion or limita-
tion of incidental, special or conse-
quential damages.
How To Order Shaver Accessories
Please refer to the shaver compari-
son and features chart near the
front of this manual that lists the
correct replacement part number
for your shaver.
It is very important to replace your
screens and cutters when necessary
to ensure a close, comfortable shave
without irritation. We recommend they
be replaced every 6 months. Here are
some signs of head and cutter wear,
indicating that replacement
is needed:
■
Irritation:
As the screens get
excessively worn you may
experience some skin irritation.
This would be especially noticeable
when you apply moisturizing lotion.
■
Pulling:
When the cutters wear you
may feel a sense of pulling and a
loss of closeness when you shave.
This is an indication that it is time
to replace your screens and cutters.
Performance Guarantee
Spectrum Brands, Inc.
Money-back Offer
If within 30 days after you have
purchased your Remington
®
branded
product, you are not satisfied and
would like a refund, return it with
the sales slip indicating purchase
price and date of purchase to the
retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse
all retailers who accept the product
within 30 days from the date of pur-
chase. If you have any questions con-
cerning the money-back guarantee,
please call 800-736-4648 in the US
or 800-268-0425 in Canada.
Questions or comments:
Call 800-736-4648 in the US or
800-268-0425 in Canada or visit
www.RemingtonProducts.com
Dist. by: Spectrum Brands, Inc.,
Madison, WI 53711
Dist. by: Spectrum Brands Canada, Inc.
4180 Sladeview Cresent
Mississauga, ON L5L 0A1
® Registered Trademark of
ROVCAL, Inc. a subsidiary of
Spectrum Brands, Inc.
© 2012 ROVCAL, Inc. 5/12
Job #CS43002_RevA
Manufactured to Remington's
specifications in the PRC.
T22-34456
Shaver: 100-240 VAC, 50-60 Hz
Contains
listed adaptor
IMPORTANT SAFETY
INSTRUCTIONS - SAvE
ThESE INSTRUCTIONS
DANGER - TO REDUCE ThE
RISK OF FIRE OR ELECTRIC
ShOCK, CAREFULLY FOLLOW
ThESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter of the
proper configuration for the power outlet.
Power Adaptor
M
