![background image](http://html.mh-extra.com/html/remington/f7805/f7805_manual_1437239006.webp)
6
,
REPLACING THE FOILS AND CUTTERS
•
To ensure the continued highest quality performance from your shaver, we
recommend that the foil and cutter are replaced regularly.
,
Signs that your foils and cutters need replacing.
•
Irritation: as foils get worn, you may experience skin irritation.
•
Pulling: as the cutters wear, your shave may not feel as close and you may
feel the cutter pulling your hair.
•
Wear through: you may notice that the cutters have worn through the foils.
,
TO REPLACE THE FOIL
•
Pull the foil assembly up to remove from the hair pocket.
•
Insert new foil assembly in hair pocket until it snaps into place.
,
Replacing the Cutters
•
Grasp the cutter between your thumb and forefinger and pull upwards.
•
Snap the new cutter into the oscillator tip.
,
Note: DO NOT press on the cutter ends as this may cause damage.
,
Foils head replacement model: SPF300
,
TROUBLESHOOTING
•
If your shaver battery is completely empty or the shaver has not been used
for an extended period of time, the shaver may not start when operated
using the cord. If this occurs, a 5 minute quick charge will allow for 3 minutes
of shaving.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the supply mains when removing
the battery.
•
Using a small screwdriver, pry off the 2 side panels.
•
Using a Philips screwdriver remove the 4 screws from the front of the shaver
and remove the front housing.
•
Using a Philips screwdriver, remove the 8 screws from the front of the shaver.
•
Remove and open the core from the shaver to expose the batteries.
•
Cut the wires connecting the batteries to the circuit board and remove the
batteries.
•
Dispose of the batteries safely.