![background image](http://html1.mh-extra.com/html/remington/d5706/d5706_quick-start-manual_1438001006.webp)
6
STORAGE, CLEANING AND MAINTENANCE
• When finished unplug the appliance and allow to cool before cleaning and storing.
• To maintain peak product performance and to prolong motor life, it is important to
regularly remove any dust and dirt from the inlet grille.
• Remove the grille as shown (FIG A), clean with a cloth or soft brush, then replace it.
OVERHEAT PROTECTION
In the event of overheating, the appliance may either stop unexpectedly or start to blow
cold air. Overheating is usually caused by a blocked grille/filter. If this happens,
immediately unplug the appliance and refer to STORAGE, CLEANING AND MAINTENANCE
to clean the grille/filter. If, after doing this overheating continues to happen, stop using
the appliance and contact Customer Service.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.