6
Take extra care when using the styler, as it can get very hot. It is
important to establish the correct temperature for your hair type
prior to use. If in doubt, start with a low temperature setting first
and increase the temperature gradually.
TO CREATE DEFINED CURLS SELECT THE 19MM BARREL
• Separate small sections of hair (about 5cms wide) and place
the ends of one section under the clamping tong.
• Hold at a vertical angle, and then rotate the barrel, rolling hair
up towards the roots trying not to overlap the hair.
• Use the cool tip if you need to get a better grip of the unit
without having to grip the heated barrel and clamping tong. The
swivel cord ensures you can turn the unit easily without getting
tangled.
• The tightness of the curl is determined by how tightly you wrap
the hair around the barrel and how long you hold the set in
place.
• Hold the clamping tong for 10 to 20 seconds, depending on the
texture and length of your hair.
• To release the curl, simply press the clamping tong and remove
the barrel from the curl. The ceramic coating will ensure that
the hair slides smoothly from the barrel.
• After removing the barrel from your hair, wrap the ringlet
around your finger and secure it with a bobby pin.
• Allow the curls to cool fully before styling, as this ensures
a long-lasting curl. When the curls have cooled (allow
approximately 5 – 10 minutes) unpin and comb through with
your fingers.
• Complete your style with a finishing balm or spray.
