7
How to Use
Usage Tips
3. Go!
• To release secured roller, remove each
clip and roller gently. Unwind, never pull. Let
each new curl spring back into position and
cool for a moment. Then brush out hair and
style. Spritz hair for extra hold.
6
Will the rollers be too hot
to touch when they’re
completely heated?
No. However, the end caps of the rollers are
made of a different material. They will
remain cool when the roller is heated. They
are designed to be held while rolling your
hair for comfort and ease of use.
How do I know when the
rollers are at “right”
temperature for curling hair?
Follow the illustration and instructions in the
“HOW TO USE” section.
Will the rollers return to their
original color after I set my
hair?
Yes, you may even see the surface of a
roller begin to return to its original color as
you curl your hair. Depending on the length
of your hair, the room temperature and the
length of time you leave the rollers in, your
rollers should be blue when you take them
out! (The rollers take about 15 minutes to
cool down.)
How long should I leave the
rollers in my hair?
Again, depending on the length and texture
of your hair, as well as the lightness of the
curl you want, timing will vary. Feel free to
experiment and have fun with your new
Remington
®
All That!
™
Setters.
Remington
®
All That!
™
Ionic Setters
• Close pouch and plug in unit. Rollers can
be used in 90 seconds.
• For a soft, wavy curl, use the rollers after
the 90-second heat-up. For a tighter curl,
use the rollers when they have reached
maximum curling temperature.
1. Get Ready
• Before setting, hair should be dry
or only slightly damp, never wet. Section
hair and comb it smooth. Roll hair as
usual, in the direction of desired style,
securing each roller with the proper size
color-coded clip placed crosswise over the
roller.
2. Get Set
• Continue until your entire head is set. The
time the rollers are left in the hair affects
the tightness of the curl. The shorter the
time, the softer the curl. Rollers will remain
curling active approximately 15 minutes.
They will return to their original color when
it’s time to take them out. If you wish to
reuse rollers, return them to the unit and
wait 90 seconds.
All manuals and user guides at all-guides.com
