6
STYLING
Set the hair dryer to a low heat and low speed setting and attach the
concentrator nozzle for precision drying. Section the hair and style using
the vent brush. Concentrate the airflow directly on the hair while styling in
the direction you desire. If necessary, hold the airflow for 2-5 seconds on
each section while curling under or over for additional hold.
USER INSTRUCTIONS
This hair dryer is equipped with a thermostat that will cycle ‘off’ if the
temperature exceeds the comfort level due to partially blocked air inlet
or air outlet grilles. In the event that the hair dryer stops during use, turn
off all switches and allow the hair dryer to cool down, at which time the
thermostat will automatically reset. Before using again, check that the air
inlet and air outlet grilles are not blocked.
Unplug the hair dryer and clean the openings if necessary. During use, do
not block the air openings or let your hair be drawn into the hair dryer.
MAINTENANCE
Your hair dryer is designed for household use and is virtually maintenance
free. When cleaning becomes necessary, turn all switches off and
disconnect the hair dryer from the power outlet.
To maintain peak product performance, it is important to clean the air inlet
grille and filter at the back of the dryer. To access the air inlet grille and
filter, grasp the air inlet grille retaining ring with your hand and twist it anti-
clockwise until it unlocks. Pull it away from the hair dryer. The filter can
now be cleaned with a soft brush or a vacuum cleaner. Take the air inlet
grille retaining ring and position it so the lugs on the ring are aligned with
the notches on the side of the dryer. To lock, turn the air inlet grille retaining
ring clockwise. The exterior of the hair dryer can be cleaned by wiping it
with a damp cloth.
