ENG
• Disconnect the device from the power
source.
• Remove the grill with the pre-filter and
take out the aqua filter in the sequence
shown in the figure.
• Place the aquafilter in soapy water for a
few minutes, leave it to air dry.
1. Cleaning the filters
• Unplug the unit when cleaning to avoid electric shock.
• Do not use chemicals or abrasives when cleaning this unit.
• Use a soft cloth to clean dust from this unit. If the surface is very dirty, wipe the device
with a damp cloth and detergent.
• When cleaning, do not use benzine, thinner, or any substance that may damage the
surface of the device.
Cleaning the water tank
• To drain the water from the tank, open the drain hole located at the bottom of the device.
Pre-substitute the container into which you will pour the water.
• Gently clean the walls of the water tank with a soft sponge.
• To avoid unpleasant odors, do not leave water in the tank for a long time.
CLEANING THE DEVICE
• Install the aquafilter and pre-filter correctly in the sequence shown.
• Connect the device to a power source and make sure it is working properly.
2. Installing and using the device after cleaning
• If you are not using the device for a long time, unplug the power cord and pack away the
device to prevent dust from entering.
• Make sure the aqua filter and pre-filter are clean and dry and there is no water in the tank.
3. Maintenance
1
2
Aquafilter
EcoGreen
Pre-filter
Cooling capacity
80 W
Heating capacity
1500 W
CADR
400 m
3
/h
Humidification performance
600 ml/h
Water tank
8 L
EcoGreen Aquafilter
Aquafilter service life
5 years
Composite HEPA + Carbon Filter
Two heating modes
750/1500 W
Three fan speeds
Three preset modes
SPECIFICATIONS
Wi-Fi control
Wireless charging
Voice control
Yandex Alice, GoogleAssistant
Remote control
Timer
1-15 h
Swing 80 degrees
Indication of lack of water
Two ice boxes
Wheels for easy movement
Size
310х310х630 mm
Ionization (separate activation of the function)
Weight
7,5 kg
Excessive foreign substances on the pre-filter and aquafilter may affect the performance of
the device.
The filters should be cleaned at least once every two months.
For maximum air purification effect, it is recommended to replace the Composite HEPA +
Carbon Filter after an average of 6 months. The frequency of replacing the filter depends
on the frequency of use of the device and the amount of air pollution in the room.
1. Download REMEZ Smart App from AppStore or Google Play. Click Sign Up to access your
REMEZ Smart account.
2. To connect the device to the REMEZ Smart app, turn on Wi-Fi, GPS, Bluetooth, mobile
data transmission on your smartphone (this must be done once during the initial
connection of the device).
Open the REMEZ Smart App, click the «+» button, select your fixture model from the list
and follow the installation steps.
QUICK SETUP IN THE REMEZ SMART APP
Attention
The device does not support 5GHz Wi-Fi. Make sure your Wi-Fi is 2.4GHz.
To set up the Yandex Alice voice assistant, scan the QR code
and follow the setup steps.
SETTING UP THE VOICE ASSISTANT YANDEX ALICE
