REMEHA Gas 120 ACE - 115, User Manual

Page: 67 / 96

Code Display text Description Range Submenu
GM012 Release Input Release signal for the CU 0 = No
1 = Yes
Gas fired appliance
GM013 Blocking Input Blocking input status 0 = Open
1 = Closed
2 = Off
Gas fired appliance
Status and sub-status
The status and sub-status are only shown if applicable.
Tab.54 Status numbers
Status Description
0 Standby
1 Heat Demand
2 Burner Start
3 Burning CH
4 Burning Dhw
5 Burner Stop
6 Pump Post Run
8 Controlled Stop
9 Blocking Mode
10 Locking Mode
11 Load test min
12 Load test CH max
13 Load test DHW max
15 Manual Heat Demand
16 Frost Protection
19 Reset In Progress
21 Halted
200 Device Mode
254 Unknown
Tab.55 Sub-status numbers
Sub-status Description
0 Standby
1 AntiCycling
4 WaitingForStartCond.
10 CloseExtGasValve
12 CloseFlueGasValve
13 FanToPrePurge
14 WaitForReleaseSignal
15 BurnerOnCommandToSu
17 PreIgnition
18 Ignition
19 FlameCheck
20 Interpurge
30 Normal Int.Setpoint
31 Limited Int.Setpoint
32 NormalPowerControl
33 GradLevel1PowerCtrl
34 GradLevel2PowerCtrl
35 GradLevel3PowerCtrl
36 ProtectFlamePwrCtrl
9 Settings
7717201 - v03 - 25062019 MID _HMI T-control - Gas 120 ACE 67