Application 1
Application 2
-All A/V equipments are located in the cabinet on the right
(
) ISR located on console table.
T located inside the cabinet.
(
) IS
Remote
control
IR signals
RF signals
IR
extender
Room 1
Room 2
IR Emitter Probe
** Optional connection, required if signal from IST to equipment is weak or infrared coverage is affected.
1. Wire IR emitter probe to your A/V equipment if required for better infrared sensing area coverage.
2. Every IST can be connected to 2 IR probe with 2in/1out jack.
3. IR emitter probe must be stick on the receiving A/V equipment (Example: DVD / Amplifier) by using
double side tape. IR emitter probe must face the IR receiver of the equipment to achieve maximum
signal.
Once you have set up the
(
) and
(
) for the
equipment you want to control, the product enables you to use your infrared remote control to work for your
A/V equipment from one room to another.
To operate, simply aim the infrared remote control at the
and press button of IR remote. The LED
indicator of
will flash, indicating IR signal received.
will send radio-frequency signal to
which decode RF to IR and sent out infrared signal to your A/V
equipment.
(Note: YOU must always leave the power switch in the “ON” position)
Normal operation
Infrared Signal Receiver ISR
Infrared Signal Transmitter IST
ISR
ISR
ISR
IST
Operating the ISR and IST
Application 1
Application 2
(Controlling A/V equipments in a separate room)
1. TV in Room 1 must be wired to the A/V equipment in Room 2 that you want to control.
2. Set-up your
and
as per setting up instructions.
(Controlling A/V equipments hidden in enclosed cabinet)
1. Place the
on the low profile console table.
2. Place the
inside cabinet
3. IR probe cable can be wired up the ceiling LCD projector if necessary.
4. Set-up your
and
as per setting up instructions.
ISR
IST
ISR
IST
ISR
IST
End
