Warning
User Guide
( IR Extender , Model: IRE-120 )
C
COPYRIGHTS 1998
REMACO TECHNOLOGIES PTE LTD
Website: www.remacotech.com
IRE-120
All products are thoroughly inspected and fully tested operational in factory.
We accept no liability whatsoever for any losses due to improper operation, or any unauthorized alternation.
All trademarks contained in this installation guide are the property of their respective owners.
Important Notes:
V: 2.0
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK.
NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
For improvement purposes, specifications and functions
are subject to change without advance notice.
AC Power Adaptor
Infrared Signal Receiver
(ISR)
Antenna
AC Power Adaptor
Antenna
Infrared Signal
Transmitter
(IST)
LED Indicator
CD 2
45:33 12 : 00
Amplifer
DVD
DC IN 17V JACK
Supply voltage: 230V/50Hz AC
Operating frequency: 434MHz
Power Consumption: 0.7 Watt
IR Remote
Radio-Frequency
Setting up
Identify the
Infrared Signal Receiver , (ISR)
Infrared Signal Transmitter, (IST)
( ) and
( ) by their
antenna shape. It is important to note that
( ) has a round antenna head and
( ) has a square
ISR
IST
head.
Infrared Signal Receiver , (ISR) ( )
1. ISR should be placed in the room from where you would like to control your A/V equipments.
(Example: TV, VCR, satellite receiver, cable TV converter, HiFi, CD player, LD player)
2. Connect the AC power adaptor of ISR to wall power socket.
3. The LED indicator should light up and it should be facing your remote control.
Infrared Signal Transmitter (IST)
(
)
1. IST should be placed in the location where your A/V equipments are located.
2. Place the LED indicator side of IST facing the A/V equipments. When needed, IR probe cable can
used to wired to your equipment to get better signal.
3. Connect the AC power adaptor of IST to wall power socket.
4. The LED indicator should light up.
IR Emitter Probe
Omini-directional
infrared signal
IR Emitter Probe required
if infrared signal is blocked
by cabinet or equipments
