Page
5
of
13
REMA Lipprandt GmbH & Co. KG
Spichernstraße 11
53175 Bonn
Tel.: +49 228 38204-0
Fax: +49 228 38204-45
E-Mail: [email protected]
Web: www.rema-bonn.de
REMA Technology Shanghai Co. Ltd
No. 1590 Songfu Road
Qingpu Industry Zone
201706 Shanghai
Tel.: +86-(0)21- 5986 9405;
Fax: +86-(0)21- 5986 9406
E-Mail:
Web: www.rema-shanghai.com
REMA USA, LLC
101 Park Place Court
Greenville, SC 29607
Tel.: +1 864 655-8981;
Fax: +1 864 655-8982
E-Mail:
REMA – TECHNICAL INFORMATION
Assembly of REMA twin plug and socket
connectors EN 1175-1, DIN 43589 connectors
1. Insert main contacts
(2)
into the contact receiving part
(1)
Caution: Observe polarity of connections!
2. Snap locking part
(5)
into the contact receiving part. With
that, the seat of the main contacts is fixed in the casing.
3. Insert coding pin into the casing from the front. It must now
be possible to read the desired operating voltage in the
inspection window of the locking part. To facilitate removal of
the coding pin, use the ejector tool (Item-No. 75058-01).
4. Screw strain relief
(7)
onto the wires by means of a cross
head screw driver.
Caution: To avoid damaging the wire insulations, the screws
(7)
must only be slightly tightened!
Connecting the wires:
Remove insulation from the wire ends by means of a wire
stripper or wire stripping knife. Ensure that any paper or
plastic residue from possible intermediate layers is removed.
The following stripping lengths must be observed:
Crimp wire ends and contacts with REMA pressing tools (refer
to REMA tool catalogue).
Caution:
The crimp inserts must be selected in accordance with the
wire diameter. Improper pressing may lead to the plug-in
device overheating. Apart from the possible destruction of the
casing, this may lead to injuries!
Plug
Socket
The following combinations are possible:
A. Pilot contacts
Insert adaptor for pilot contacts
(3)
into the contact
receiving part
(1)
Connect pilot contacts
(4)
with the connecting lines
and insert into the adaptor
(5)
B. Pilot contacts and auxiliary contacts
Insert adaptor for pilot contacts
(3)
into the contact
receiving part
(1)
Connect pilot contacts
(4)
with the connecting lines
and insert into the adaptor
(5)
Connect auxiliary contacts
(4a)
with the supply
lines and insert into the contact receiving part
(1).
C.
Air transport system
Insert the adaptor for the air transport system
(3a)
into the contact receiving part.
D. Air transport system and auxiliary contacts
Insert the adaptor for the air transport system
(3a)
into the contact receiving part.
Connect auxiliary contacts
(4a)
with the supply
lines and insert into the contact receiving part
(1).
Assembly of REMA DIN connectors
