17
track, 1~6)
For example: running the first cruise track.
a.
Click “SHOT” button.
b.
Press 1 on the number pad to activate the first cruise track..
c.
Click “Enter” button.
4.2.3 Stop Cruising Track: [SHOT] + [OFF]/ Use level
4.3 Auto scanning (2-spot scanning, 360° scanning)
The Auto Scanning function enables that the Dome Camera can scan randomly
between 2 selected locations, or can do 360° scanning. While scanning, it will
automatically run with matched speed according to the lens’ focal length.
4.3.1 Scanning between Two Spots
a. Move to the starting point (point A) by using level. Then click “PRESET” button,
and input 101 on the number pad. Finally click “ENTER” button.
b. Move to the ending point (point B) by using level. Then click “CALL” button.
After that, input 101 on the number pad. At last, click “ENTER” button.
c. Click “CALL” button. Then input 103 on the number pad. At last, click “ENTER”
button.
d. If you want to stop scanning, please use the level.
4.3.2 360° Scanning: [CALL] + [106] + [Enter]
a. Click “CALL” button.
b. Input 106
c. Click “ENTER” button.
d. If you want to stop scanning, please use the level.
4.4 Home Place
The Home Place function is that the Dome Camera will return to No.1 preset
location automatically when no operation is done in a period of time. The Home Place
function of Dome Camera can be activated through keyboard.
4.4.1 Start Home Place Function: [PRESET] + [107] + [ENTER]
a. Click “CALL” button (The screen shows as picture 27)