RP6500 User’s Manual
Page 26 of 31
succeeds.
When receiving proper 5-tone signaling, squelch will be activated according to the “RX Squelch Mode” defined
by the user. You can receive the call and LED flashes orange.
After the radio decoding succeeds, the radio will work according to the decoding call response set by the dealer.
2) 5-Tone Encoding
Encoding template consists of at least one and at most three encoding sequences, and each decoding
sequence can be set with 5-Tone, and DTMF. If it is set with 5-Tone, you need to program its content.
If the PTT ID on the channel you select has been set with 5-Tone, 5-Tone signaling will be transmitted when
making a call.
Or transmit 5-Tone signal by pressing the Call 1/2/3/4 button,, which can be set by the dealer.
Transmit beginning/ending signaling (PTT ID)
The identify signal of
transmit beginning/ending are used to maintain or disconnect some repeaters or phone
system.
“Transmit start” is used to connect routine repeaters and auxiliary facilities. If the ID transmitted is matchable
with that of the repeaters, the repeaters and auxiliary facilities are available.
“Transmit over” is used to disconnect routine repeaters and auxiliary facilities. If the ID transmitted is matchable
with that of the repeaters, the repeaters and auxiliary facilities are disconnected.
