manualshive.com logo in svg

ReliOn SS2280, User Manual

Share
Download
ReliOn SS2280 User Manual Download Page 50

 
 

Hardware Operations 

1230B0033901

 

 

3-11

3.7 System Fan Assemblies 

This server contains two groups of hot-swappable fans seated in the system fan cages, which 

are located inside the chassis. These two groups of system fans respectively locate in system 

fan cage (1) and system fan cage (2). The system fan cage (1) supports three sets of system 

fans and the system fan cage (2) supports two system fans. These fans maintain the ideal 

temperature for the motherboard, backplane and disk drives. If one fan fails, the speed of 

other fans will increase. With the bad one replaced, the other fans may revert to the normal 

speed. 

 

The location of the system fan assemblies is shown below: 

 

Figure 3-19    Location of System Fan Assemblies 

 

  System Fan Assembly (1) 

  System Fan Assembly (2) 

 

Reminder

 

Before you remove or install the system fan and system fan cage, please follow the steps 

below: 

Step 1: Remove the chassis cover. To remove the cover, see “3.2 Chassis Cover”. 

Step 2: Disconnect all necessary cable connections.

 

 

 

 

Before removing the system fans, please remove the system fan cage cable first. 

Summary of Contents for SS2280




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands