RESETTING THE DATE AND TIME
To adjust the date or time after it has been setup when you first use
the unit.
Start with the monitor in the off position.
1. Press and hold the USER ID Selection Switch (
).
The User ID Symbol (
or ) and the Medication Symbol (
) will
appear on the display.
Press the USER ID Selection Switch (
) repeatedly until the year
flashes on the display.
2. Refer to “Setting the Date and Time”.
The User ID Symbol (
or ) , the Medication Symbol (
) No.1,
and the current setting (
on
or
oFF
) will appear on the display, after the
minute has been set.
3. Press the START/STOP button to turn the monitor off.
NOTE:
If you need to change the Date and Time, always adjust the
Date and Time setting before taking the next measurement.
SETTING THE DATE AND TIME
21
HEM-7300-WM_A_M_A-E_SP_r2.qxp 8/22/11 4:48 PM Page 21
