14
SETTING THE POSITIONING INDICATOR
SETTING THE POSITIONING INDICATOR
After the time setting, press the button to set the positioning indicator.
1. Select the user ID (A or B).
2. Press the button to select the positioning indicator “on”, or “oFF”.
NOTE:
The default setting is “on”. The positioning indicator setting is just for the user you select.
on:
After the positioning indicator ( ) lights for more than 2 seconds, or the
positioning indicator symbol ( ) blinks for more than 5 seconds,
measurement starts automatically, even though the monitor is not in the proper
position.
The monitor was in proper position during the measurement, symbol is
displayed with the measurement values.
The monitor was not in the proper position, symbol is displayed with the
measurement values.
oFF: Measurement starts without the positioning indicator.
3. Press the Start/Stop to store the setting.
The monitor has a built-in positioning indicator that is used as an aid in determining if
the monitor is at the correct height. When using this positioning indicator, the distance
from the top of your seat measuring to the top of the table you are sitting at, should be
12 ± 2 inches (30 ± 5 cm). If the distance measured between the top of your seat and
table do not fall within this parameter, please correct your seat or table height. If you
are unable to make any seat or table adjustments, please turn-off the position sensor and
position your wrist at heart-level by yourself.
TM
TM
TM
