3
Reliant_Countertop_User Manual
ELECTRICAL
• The unit must be properly grounded at all times.
• Never use an adapter plug or extension cords to power the unit.
• The wall outlet, circuit and supply voltage must be checked carefully by qualified electricians.
• The unit should be plugged into its own dedicated circuit at rated voltage.
• Broken or frayed power cords are forbidden to be put into use.
• Power cords should be prevent from being ran over or damaged when removing the unit.
• Power supply should be switched off before servicing electrical components in the unit.
• Wiring diagram can be referenced if needed.
Warning:
Failure to follow the above instructions may lead to dangerous occurrence.
THERMOSTAT
Electronic Refrigeration control system maintains temperatures between
33˚ and 41˚ (0.5˚ to 5˚ ) based on factory settings. Please do refer to Digital
Control User Manual inside the product or consult qualified technicians
prior to adjusting a different temperature ranges.
STARTUP
• Plug the unit in to make it run.
• The unit should be running for 2 to 3 hours before loading products so as to detect any potential
electrical failure and concealed shipping damage.
• Do not replace the temperature controller or change its parameters at random without the help of
qualified technicians.
• Do not restart the unit immediately when it is disconnected or shut off. Please wait several minutes
before restarting it.
CLEANING AND MAINTENANCE
Proper maintenance and cleaning can prolong service life and contribute to a better performance of the
unit. It is recommended to clean the unit without loading products every 1 to 2 months.
Notice
: The unit should be cut off before cleaning.
STAINLESS STEEL CLEANING
• Ammonia and soap can be used to polish the stainless steel surfaces and wipe off fingerprints and
smears.
• Other specialized commercial detergents can be used to remove grease and oil.
• Soft cloths, towers and sponges are recommended to be used along with detergents.
• Steel wool cannot be used for stainless steel cleaning.
• Hydrochloric acid or chlorine-based products cannot be used for stainless steel cleaning.
• Any detergents that contains quaternary salts cannot be used for stainless steel cleaning.
• Stainless steel surfaces should be wiped dry after cleaning.
Warning
: Failure to follow the above instructions may result in abrasion, pitting and rusting of stainless
steel surfaces.
