Table of Contents
Model:
SG-720 (High Frequency Industrial Charger)
Before using this battery charger, read all instructions and warning
labels on charger and vehicle.
Reduce risk of injury, property damage, and/or fire: if you do not
carefully read and follow these safety instructions, injury, death,
property damage, and/or fire can occur.
DANGER – Risk of Electric Shock:
•
Always disconnect the charger handle from the vehicle and unplug
the AC power before servicing vehicle. By only turning off the charger
there is still risk of electric shock.
•
Never touch the uninsulated portion of the AC or DC connectors or
uninsulated battery terminals.
•
Ensure all electrical connectors are in good working condition: do
not use cracked or corroded connectors or those that make poor
electrical contact. Use of damaged connectors can result in electric
shock and/or overheating.
•
Do not attempt to disassemble, modify, or service charger. No user
serviceable parts are inside. Service must be performed by a qualified
service technician. Improper reassembly can result in explosion, fire,
or electrical shock. Contact technical support if the charger is not
working properly. Attempting to disassemble the charger will void all
remaining warranty.
•
Always connect to a properly grounded 3-wire outlet. Never modify
the AC cord. If it will not fit an outlet, have the proper outlet installed
by a qualified electrician. Extension cords are not recommended,
but if used must be a 3-wire grounded cord of at least 14AWG and
less than 25 ft long. Improper extension cords may result in electrical
shock or fire.
IMPORTANT Safety Instructions/Precautions
1
