11
DO’S AND DON’TS
Safety
•
Be sure to read the user manual before starting the operation of the
SET-TOP-BOX (STB) unit
•
Do not touch the power cord with wet hands as it may cause an electric shock
•
Never open the cover. It is very dangerous to touch the inside of the STB
due to the possibility of an electric shock
•
Place the STB in a well ventilated and no-heat environment
•
When the STB is not in prolonged use, make sure that the power cord is pulled out
from the outlet
•
Do not use a damaged power cord as it may cause fire or an electric shock
Precautions
•
Install the STB horizontally. An uneven installation may cause the STB to be damaged
•
Do not put any items on the STB that may overheat it or cause damage
•
Do not install the STB in places, where:
it is subject to vibrations
it is exposed to direct sunlight
there is humidity
the temperature is too high or too low
there is no ventilation
•
Moving the STB to a hot area from a cold one will cause condensation
•
Do not operate the STB for one or two hours until it has dried completely
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering
or disassembly is prohibited.
Do not connect the STB through a VCR. Video signals fed through VCRs may be affected by copyright protection
systems and the picture will be distorted on the television.
CUSTOMER PREMISE EQUIPMENT
12
FEATURES & FUNCTIONS
Signal Checking
A progress bar indicates the signal strength
and quality (signal is strong and without errors).
To access scanning, press . An advanced
signal parameters item is also displayed.
In case of poor or bad signal quality,
check connections (and try again). Follow
instructions on screen - Advanced Signal
Parameters item is available.
The “Next step: Channel Scanning” access
is unavailable. The help text is displayed.
STARTING UP - Signal Checking
Note: Even if signal quality is poor or bad, left arrow key
permits to cancel the modifications and close pop-up.
STARTING UP
STARTING UP involves the following 3 steps:
•
Signal Checking
•
Channels Scanning
•
Results of Scanning
The installation module works step by step:
To navigate back and modify a previous step, use LEFT arrow key
