“A” Dimension: 3-1/2” to 48” (90mm to1200mm) in 1/4” (6mm) increments
Bulletin 016
March 2022
Page 5 of 10
www.reliablesprinkler.com
Model DH56 Dry Sprinkler with FP Escutcheon
Figure 4
Hole in Wall
3-1/4"
[82mm]
2 5/8" Dia.
[67mm]
"A" Dimension
System Tee
Wall
4" [102mm] Min.
12" [305mm] Max.
Ceiling
Sprinkler Cup
Escutcheon
Inlet Fitting
1/4" [6mm]
1/4" [6mm]
Escutcheon Adjustment
Escutcheon Adjustment
1 1/4"
[32mm]
Nom
Nominal Position of
Escutcheon
5/8" [16mm]
016FP
Finish Combinations: FP Recessed Escutcheon
Sprinkler
(1)
Escutcheon
(3)(4)
Bronze
Brass
Chrome
Chrome
White Polyester
(2)
White Polyester
Black Polyester
(2)
Black Polyester
Custom Color Polyester
(2)
Custom Color Polyester
Electroless Nickel PTFE
(2)
Stainless Steel
Notes:
1.
Cup for FP Recessed is unfinished galvanized steel except
electroless nickel PTFE sprinkler uses a stainless steel cup.
2. UL Listed as Corrosion Resistant.
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.
Note:
Do not install the Model DH56 Dry Sprinkler with FP recessed escutcheon in locations where there is positive pressure in the
cavity behind the sprinkler relative to the pressure at the sprinkler.
