MAINTENANCE
A. Oil Injection
1. In order to ensure the best performance and life of the cutting
machine, please always keep the lubricating oil pot in an oily state.
2. Inject oil every 30-40 hours of use.
B. Grinding Wheel
1. When more oil pollution deposits on the contact surface of the
grinding wheel, it affects the grinding function.
2. Remove the grinding wheel and use grinding paper to clean (refer to
grinding wheel removal)
C. Installation Screw Inspection
1. In order to ensure the best performance and operating safety of the
cutting machine, it is necessary to check whether the installation
screw is tightened properly.
2. If the screw is loose, it should be tightened again immediately.
SAFETY
1. Workplaces should be kept clean and tidy.
2. The blade is sharp. Please ensure the blade is kept in the off "O" position and
that the battery is removed when not in use. Keep away from children.
3. When the machine is not in use, the cutter protector should be kept in the
lowest position
4. Before using the cutting machine, inspect it before every use. Double check
the installation screw and blade are safely secured.
5. If the cutting resistance is strong and the cutting is not smooth, the cutting
force should not be pushed hard. Double check the sharpness of the blade
and the type of material being cut.
6. Before maintenance, please ensure the battery is removed and the power
supply is cut off.
7. Connect the ground wire to ensure safety.
6
