25
MACH-Air™ VAV Controller
SETUP-Tool™
2002 Reliable Controls™ Corporation
MSet Mode
With the SETUP-Tool™ in MSet
mode, the buttons are used to
change the address, baud-
rate, network type, last panel
settings, and to calibrate the
actuator motor.
1. Select the parameter to change
2. Use the ‘Up’ or ‘Down’ arrows to
change the default value
3. When all changes are complete
press the ‘Update’ button and
use the ‘Up’ arrow to change the
value from ‘No’ to ‘Yes’. This
sends the changes to the
controller. Changes are complete
when the value changes back to
‘No’.
Each MACH-Air™ VAV controller
must be MSet using the
SETUP-Tool™.
Refer to the
SETUP-Tool™ Quick
Start Guide
for user information.
