SETUP
1. Place the massager on a chair and secure it by fastening the elastic straps
around the back of the chair.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the adapter into an outlet.
4. Turn on the device using the controller (instructions on page 5).
5. When finished place the controller in the pouch attached to the seat cushion.
6. Remove the adapter from the outlet when not in use.
•
Do not setup or use the massager in a bathroom or similary wet/damp areas as
such an environment may reduce the lifespan of the massager mechanism.
•
Ensure the massager is not exposed to direct sunlight or placed near sources of
heat.
•
Do not use the product on any wooden surfaces as the zipper may scratch the
surface.
Note:
This product produces a warming heat. It is not intended to be used for
therapeutic heating. Please allow a few minutes to reach maximum temperature.
3
