11
INSTALLATION
STEP 3: INSTALLING THE ARMRESTS
�
Preparing to Install the Armrests
Locate the left-side air hoses on the body of the chair that will be connected to the left-side
arm panel. Locate the right-side air hoses and electrical plug on the body of the chair that
will be connected to the right-side arm panel.
1. Remove the rubber plugs located
on the inside of the arm panels, and
set aside for later.
Air hoses
(Both left and right side)
Electrical Plug
(*Right side only)
Rubber
plug
Arm panel (inside)
2. The armrest exterior parts should
snap into place.
Armrest
exterior part
Arm panel
(outside)
Note: The hoses and electrical plug
may be underneath the chair seat, so
they may not be visible without taking
them out.
3. Carefully angle one of the arm
panels so that the bracket on the body
of the chair is angled with the brace on
the inside portion of the arm panel.
Then proceed to slide it halfway into
the mounting bracket.
Angle of sliding
4. Holding the arm panel in place
halfway, reach and connect the air
hoses to the nozzles located on the
arm panel.
(The grey hose connects to the right
nozzle while the black hose connects
to the left nozzle respectively.)
(The electrical plug connects to the
socket on the right arm panel.
There is no electrical plug and
socket on the left side.)
11
