background image

24

23

T/7i Specifications 

Type: 

Passive Radiator, front-firing active woofer, down-firing passive radiator

Active Drive Unit: 

8in., 200 mm long-throw, inverted dust cap, steel chassis

 

Passive Radiator: 

10in., 254 mm

Lower Frequency Response:  

30 Hz at -6 dB in room

 

Input Connectors: 

Hi Level Neutrik Speakon, Lo Level single phono, LFE phono

 

Input Impedance: 

High Level: 150kΩ, Low Level: 10kΩ, .1/LFE: 10kΩ

Gain Control Range: 

80 dB

 

Power Output: 

200 Watts (RMS)

  

 

Phase Switch: 

Yes, 0 or 180 degrees

   

Amplifier Type: 

Class AB

Wireless Capability: 

Yes - REL Arrow™ wireless system [required], Sold separately

Protection System

Fully Electronic SET-SAFE: 

Yes

 

D.C. Fault: 

Yes

 

Output Short: 

Yes

 

Mains Input Voltage: 

220-240 volts, 110-120 volts for certain markets

 

Fuses: 

 2 Amp semi delay 230 volts operation 

4 Amp semi delay 115 volts operation

 

Dimensions (WHD):  

 Including Feet and Rear Panel Controls 

12 x 14.3 x 15 in., (305 x 362 x 382 mm) 

Add 1.75 in (44.5 mm) in depth when using Hi Level connector

Net Weight: 

36 lbs. (16.3 kg)

Finish: 

Gloss Piano Black or White Lacquer

 

Supplied Accessories
Mains Lead: 

Yes

 

Neutrik Speakon Interconnect: 

Yes (10 Meters Nominal)

  

Users Manual: 

Yes

T/5i Specifications 

Type: 

Closed Box, down-firing active woofer

 

Active Drive Unit: 

8in., 200 mm long-throw,  inverted dust cap, steel chassis

 

Lower Frequency Response: 

32 Hz at -6 dB in room

 

Input Connectors: 

Hi Level Neutrik Speakon, Lo Level single phono, LFE phono

 

Input Impedance: 

High Level: 150kΩ, Low Level: 10kΩ, .1/LFE: 10kΩ

Gain Control Range: 

80 dB

 

Power Output: 

125 Watts (RMS)

  

 

Phase Switch: 

Yes, 0 or 180 degrees

   

Amplifier Type: 

Class AB

Wireless Capability: 

Yes - REL Arrow™ wireless system [required], Sold separately

Protection System

Fully Electronic SET-SAFE: 

Yes

 

D.C. Fault: 

Yes

 

Output Short: 

Yes

 

Mains Input Voltage: 

220-240 volts, 110-120 volts for certain markets

 

Fuses: 

 1.6 Amp semi delay 230 volts operation 

3.15 Amp semi delay 115 volts operation 

Dimensions (WHD):  

 Including Feet and Rear Panel Controls 

10.5 x 12.5 x 12.7 in., (267 x 317 x 322 mm) 

Add 1.75 in (44.5 mm) in depth when using Hi Level connector

Net Weight: 

26.5 lbs. (12 kg)

Finish: 

Gloss Piano Black or White Lacquer

 

Supplied Accessories

Mains Lead: 

Yes

 

Neutrik Speakon Interconnect: 

Yes (10 Meters Nominal)

  

Users Manual: 

Yes

In the interest of product development, REL Acoustics Limited reserve the right to vary these specifications without notice.

Summary of Contents for T/i Series
















Reviews: