Pg. 30
Doc ID: 191-6203A
Doc Rev: 100219
6. Flip the EXP friction disk over, and repeat on the other side
depending on engagement preference.
7. If you need to disassemble the EXP disk, you can watch the
video on our website under Tech Tips at
www.rekluse.com/support/videos
.
Note:
To maintain even pressure, when using two different color
spring sets, install one set of 3 on one side of the EXP and the
remaining set of 3 on the other side.
If you disassemble the EXP, the Teflon pads may fall out or be stuck to the
ramp surfaces of the EXP bases. Take care to ensure all pads are correctly
placed into wedge pockets using gentle pressure to avoid damage to the
pad surfaces before reassembling the EXP. Properly seated pads will be
secured in place once the EXP is reassembled. Operating the clutch without
the pads in place will cause part damage or failure.
