Doc ID: 191-6300B
Doc Rev: 101722
Pg. 25
OPTIMIZING THE CLUTCH LEVER
If your bike model is not equipped with a perch adjuster bolt,
you may purchase, as an option, a Rekluse Adjustable
Reach Lever.
Optimization with OE Perch Adjuster
Kits for Honda the CRF 450 and CRF 250 include a new
perch adjuster bolt. Replace your OE perch adjuster bolt with
the one included in your kit. These bolts will not be used on
the CRF450RX.
Kits for Yamaha the YZ450F and YZ250F include a new
perch adjuster bolt. Replace your OE perch adjuster bolt with
the one included in your kit. These bolts will not be used on
the YZ450FX and YZ250FX.
Adjust the lever:
•
Set the clutch lever to the desired reach point while
maintaining clutch lever slack.
•
Turning your adjuster bolt farther in will bring the
lever closer to the bar and allow for a closer reach
point.
•
Backing your adjuster bolt farther out will push the
lever farther from the bar and allow for a further
reach point.
