Setup
First Time Use
Fully extend the aerial and give the button a quick press to turn
the radio on. A welcome splash will show followed by the radio’s first
scan for the available DAB stations in your area. Once the scan is
complete the radio will tune into the first alphabetically listed station
available.
If the radio has been through this function already the radio will
display the date and time. Press the
button to bring the radio out
of standby mode.
If you see the message ‘Time is not set’, give the button a quick
press to bring the radio out of standby mode. This should start the
DAB process and set the date and time.
If the display shows ‘No Signal’ then the radio is not receiving a
DAB signal. This can be down to the service available in your area,
the radio being too close to large electrical devices such as
microwaves, etc or interference cause by large buildings, trees and
hills. In this instance please use the radio in FM mode.
Please Note:
You can set the date and time manually, see page 19.
7
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Summary of Contents for 86737
Page 32: ......
